A super-concentrated form of stabilised phosphite (PO3) derived from a blend of ammonium and potassium phosphate which is taken up quickly and mobilised around the whole plant.
Bullet Phosphite provides protection for new and existing growth by assisting the plant in periods of stress, thereby aiding disease resistance via the induction of beneficial metabolic responses to pathogens. Also a potent stimulator of plant root growth.
Unlike cheaper phosphites, this formulation contains zero aluminium phosphite.
|Applicator||Application Rate||Water Volume||Pack Size (Litres)||Pack Coverage (m²)|
|Boom Sprayer||5 - 10 ltr/ha||200 - 300 ltr/ha||5||10,000 - 5,000|
|Knapsack||0.5 - 1.0 ml/m²||20 - 30 ml/m²|
Apply evenly, avoid overlapping or missing areas, using a suitable calibrated sprayer.
If there is no rain within 2 days of application irrigate the treated area thoroughly. Do not apply in hot, dry weather or frosty conditions.
Half fill the sprayer with clean water. Add concentrate as required and mix thoroughly whilst adding remaining water.
|Ingredient||Oxide Value||Elemental Value|
|Total Nitrogen (N)||5.20%|
|Phosphorus Pentoxide (P2O5)||33.10%||14.44% P|
|Phosphite (PO3)||37.00%||14.44% P|
|Potassium Oxide (K2O)||7.80%||6.48% K|
|pH||3.0 - 5.0|
Please note: Packaging may vary.
For further information regarding Maxwell Bullet Phosphite, please contact our technical sales team on .