Everedge Classic – Green
Everedge is the permanent solution to the age-old problem of maintaining neat edges for lawns, path edging, flower and vegetable beds. It can be used in a variety of soil conditions.
Our Lawn Edging Irons are available to assist with the installation of EverEdge
Everedge Installation Examples
Everedge is easy to install and requires no further maintenance.
Once a neat earth edge has been established, the only tools required to install everedge are a heavy hammer, a screwdriver, and a block of wood. Everedge is engineered from 1.6mm gauge galvanised mild steel, coated with corrosion-resistant black paint finish. This means that once it’s installed, it’s maintenance-free. The depth stated does not incorporate the spikes.
Please note that for most applications, lawn to path or lawn to flowerbed, the 1.6 mm is the preferred product to use, however if there is a possibility of vehicle traffic then the Heavy Duty or ProEdge (2.5 mm) is preferable, please contact a member of our technical sales team for more information.
Everedge Installation Instructions & Video
- It is important to form either a new edge or to re-cut your existing edge. This can be straight or curved.
- Place Everedge where required. Take a block of wood and place on top of the Everedge and hammer in to the ground to approximately 15mm below your cut grass level. Curve or bend Everedge as required.
- Link the Everedge by locking on to the previous piece. There is also a tongue below the locking piece which should be pushed through the hole with a screwdriver.
To anchor EverEdge securely in poor ground conditions, use the Everedge Pin & Sleeve System.
Everedge lawn edging is now available in a range of colours including slate and brown.
If you would like to discuss any of our Everedge lawn edging products, you can speak to a technical sales advisor on 01 841 7399.