I am sure everyone will again be rooting for Murray to win this year's Wimbledon which starts on the 29th June and runs for two weeks finishing on the 12th July. So let's hope the weather does not interfere with his preparations.
The Wimbledon fortnight will have no doubt stimulated many people to get out and play some tennis. Coupled with the long daylight hours, outdoor tennis facilities will no doubt be busy coping with the demand, especially clubs with grass courts.
The weather has also been challenging, with an ever changing front bringing spells of sun, rain and fluctuating soil and air temperatures. We would hope that during July, temperatures will rise into consistently high double figures (18-20 degrees C), promoting some decent growth. However, hot warm weather often sees the need to irrigate to replace lost evaportranspiration rates.
With such a dry spring combined with the fact that during the months of May & June below average rainfall was recorded, leaving soils in quite a dry state particularly at depth. It is important you ensure the soil profile is thoroughly wetted to depth.
Evapotranspiration rates will be high in July, water losses can be between 4-6mm a day. Irrigate uniformly and ensure you replace what has been lost. It is important to ensure that the water gets deep into the rootzone, to a minimum of 150mm to encourage deep rooting. Check with a probe. Allow to dry out and repeat the irrigation process.
Allowing surfaces to remain dry for a period of time can lead to problems of dry patch, a condition that prevents water infiltration into the soil and thus forming areas of non-uniform turf quality. To help overcome dry patch, the use of wetting agents have now become an integral part of the maintenance regime, with applications being applied on a monthly basis throughout the summer.
This month sees the continuation of regular maintenance tasks - grass cutting, grooming, brushing, aerating, feeding and watering. Particular attention should be made to your irrigation regimes, ensuring that all turf surfaces receive adequate amounts of water to maintain growth.
Groundstaff will also be trying to maintain the sward height at between 6-10mm depending on the level of play.
Begin to plan your end of season renovations based on the condition of the courts. You may need to book specialist supplies and contractor services. Ensure you buy compatible loam/soil dressings for your courts.
The condition of the court will certainly contribute to how well it performs, particularly with reference to ball bounce and foot adhesion. Ideally, you should be providing a true, firm and level surface that is both safe for the player whilst, at the same time, providing an adequate consistent ball bounce.
Foot traction/ball bounce can be affected by several factors:-
* Amount of organic matter (thatch) present in the surface
* Moisture content of the playing surface
* Condition of sward
* Insufficient court rolling
* Uneven levels/worn areas
* Type of footwear worn and condition of balls
Excess thatch content (more than 8mm) will affect playing quality by the mere fact that it becomes a spongy layer. This spongy layer deadens ball bounce and can cause poor foot traction - no grip. Control the build up of thatch by regular verticutting/grooming.
The level of moisture on or in the soil profile will affect how the court plays; a wet, firm surface will, in fact, speed up the pace of the ball. The use of covers will help control the wetness and condition of your courts.
The amount of grass cover on your courts will also dictate how the courts play. Too much grass, especially if over 10mm in length and over fed (applying too much nitrogen fertiliser) will, in turn, affect ball bounce and foot traction.
It is important to roll the courts to firm them up; rolling should be done during favourable weather conditions, ideally when the soil profile is malleable/moist enough to bind together.
It is important to monitor the condition of the court and constantly repair any bare and uneven levels. Topdress with compatible loam soils/ rootzone materials and overseed with a good quality ryegrass at a rate of 35-40 grams per m2.
It is also the players responsibility to ensure they are wearing appropriate footwear and using balls that are not damaged.
The mowing height on the courts should be lowered to around 6-10mm for the playing season, subject to local weather conditions, but remember not to remove more than 1/3 of total grass height in each cut.
Mowing frequency will be dependant on a number of factors, grass growth, sward type, level or standard of facility, resources (staff and machinery) but, generally, it may vary from daily, in the case of Wimbledon, to two to three days a week, or even weekly, depending on resources available.
It is important to remove any weeds from the playing surface, as they can affect ball bounce and performance of the court. Weeds can be removed by hand, or controlled by application of chemicals, usually a broadleaf selective weed killer. Best results are achieved when the soil has warmed up and the grass is actively growing.
Grooming and verticutting are operations that remove unwanted side grass growth and reduce the amount of debris in the sward. These operations are carried out on a regular basis, often weekly or fortnightly, and providing you have sufficient watering facilities. These operations are completed in conjunction with your mowing regimes.
A programme of aeration can be considered to alleviate any compaction from recent play. However, this needs to be done with an appropriate aerator, something like the Hydrajet, Dryject or SISIS Javelin Aeraid, which are able to penetrate the hard clay soil profiles without causing surface disruption, thus allowing some much needed air exchange to promote a second phase of grass growth.
Fertiliser treatment and turf tonic can be continued in accordance with your annual programme. If you haven't got a fertiliser programme, have your soil tested; try an independent soil analysis company for an impartial set of results.
In recent years, we have seen a change in feeding habits in professional sport, with more groundsmen resorting to a more detailed feeding programme using a concoction of fertiliser products and soil conditioners to maintain plant health.
These products come in both granular and liquid formulations, Liquids formulations tend to be more efficient and react much quicker than granular products. However, granular products tend to be easier to apply and use.
We are now seeing granular products being used as base/slow release feeds and being topped up with a range of liquid feeds that include bio stimulants along with micro nutrients. To help improve the performance of these feeds, a number of soil additive products and wetting agents are in regular use.
However, for a majority of smaller clubs/facilities they will be reliant on a trusted base fertiliser, a 12:0:9, 7:0:7 or similar compound blend, or apply a slow release fertiliser to see you through to August. The choice of material and how well it works will be dependant on factors such as soil type and weather, with moisture and soil temperature being the catalyst for growth.
The performance of slow release fertilisers can be influenced by the weather, often producing a flush of growth when you least expect it. Some grounds managers may use straight compound granular or liquid fertilisers which activate when in contact with moist soil conditions, effectively stimulating grass growth within days.
All weather surfaces:-There is no such thing as maintenance free facilities, they all need a certain level of maintenance to keep them in good condition and safe for play.
Artificial grass systems - weekly - Keep surface clean with regular sweeping and brushing. Remove any algae and moss from surface. Sand filled systems require regular brushing to maintain manufacturer's recommendations on sand levels and pile heights.
American Fast Dry courts - before/after games - Keep surface clean, rolling to consolidate surface, levelling and brushing of fast dry materials, brushing to clean lines.
Clay courts - weekly - Keep surface clean, regular sweeping and brushing to restore playing levels using SISIS Trulute or similar equipment. Topdress any hollows or damaged areas. Repaint lines.
Tarmacadam - weekly - Keep surfaces clean, regular sweeping and brushing. Repair any hollows or damaged areas. Repaint lines.
Many Groundsmen now undertake a number of testing procedures to assess their courts, generally these tend to be ball bounce and hardness.
Ball bounce is simple; measure the height of a rebounding ball dropped from a pre-determined height. Testing for hardness requires a specialist piece of equipment called the Clegg Hammer, which essentially consists of a hammer weighing 0.5kg to which an accelerometer is attached.
The hammer was developed for testing soft materials, such as turf or sand, and is ideal for testing sports surfaces such as golf greens, cricket pitches and tennis courts.
This equipment can be hired from specialist suppliers. Recording and monitoring these two parameters will help you have a better understanding of how your courts are performing.
Many groundsman are now also using moisture meters to monitor soil moisture deficit (SMD); by keeping an eye on these losses, you can then apply the correct amount of water to replace the water lost by evaportransipration.
Keep an eye on fungal disease attack and use approved fungicides to treat infected areas. Outbreaks of Red thread may occur, which often indicates your grass is in need of a feed. Usually an application of a nitrogen feed will be enough to control an outbreak of Red thread.
It is important to remove any weeds from the playing surface as they can affect ball bounce and performance of the court. Weeds can be removed by hand or controlled by the application of chemicals, usually a broadleaf selective weed killer. Best results are achieved when the soil has warmed up and the grass is actively growing.
It is important to keep you mowers clean and sharpend, adjusting/checking your height of cut on a daily basis.
It is essential to have water available for irrigation purposes. Irrigation is required for court preparation and repairs.
Keep an eye on fungal disease attack, and use approved fungicides to treat infected areas.
Seeding sparse or bare areas can be continued. Any rise in soil or air temperatures will help germination. Use germination sheets to aid this process but remove the sheets regularly to check for disease. Remember that without good seed to soil contact the operation is useless. Ensure you use new seed as old material may not give you the required germination rates.
It is vital to keep tennis playing surfaces clean and free from debris to avoid possible injury to players.